EasyManua.ls Logo

Monitor Audio 3G Series User Manual

Monitor Audio 3G Series
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Loudspeaker
and Subwoofer
Initial Set Up
Guide
Question and Answer IconNeed help?

Do you have a question about the Monitor Audio 3G Series and is the answer not in the manual?

Monitor Audio 3G Series Specifications

General IconGeneral
Series3G
TypeBookshelf
Sensitivity88dB
Power Handling100W
Crossover Frequency2.8kHz

Summary

Introduction

Guarantee

Subwoofer Positioning and Set Up

Initial Set Up

Leave the subwoofer unplugged from the mains until all signal cables are connected and feet attached.

Connecting to an AV Receiver

The majority of AV amplifiers have automatic setup systems. If your amp has an auto set up procedure, run this now with the volume set to around 10 - 12 o'clock.

Connecting to a Stereo Amplifier

Loudspeaker Positioning

2 Channel Positioning

When arranging a 2 channel system, the listening position and the loudspeakers should form an equilateral triangle. The speakers should be positioned approximately 6 - 10 feet (1.8 - 3m) apart.

AV Positioning

Please refer to the illustrations opposite for the ideal angles and positions of each speaker in your surround system. The speakers should be distanced from the wall according to the speaker and personal preference.

Front Speakers

The centre channel can be placed either above or below the TV screen, and as close as possible. If positioned in a cabinet or sitting on top of the TV, ensure that the front edge is aligned with the front edge of the TV or shelf.

Surround Speakers

Surround speakers should be placed high enough so that the drivers do not fire directly at ear level when sitting down — one rule of thumb is to place them at ear level while standing.

Running-In Your Speakers

Product Specific Instructions

Related product manuals