Mono Bx Series Operating Instructions

GREGGS NO STEAM, LED LIGHTS
30/06/16 Rev.B16
14
8.0 BX‘CLASSIC’ OPERATING INSTRUCTIONS
RUNNING PRE-SET PROGRAMS
REFER TO CONTROL PANEL ILLUSTRATION (SEE RIGHT)
1 Switch on power by pressing green
button (1).
2 Select required program (shown at P) using
UP/DOWN scroll keys (2).
3 Press START key (3) to begin bake cycle.
• Oven will heat to set temperature
and display will flash actual temperature.
• When set temperature is reached
the display will stop flashing.
The oven is now ready
4 Load product. Close door.
5 Press START key (3).
Display will show the following:-
(9) • Actual temperature.
(8) • Remaining bake time in minutes.
Display will automatically switch to show
remaining seconds during the last minute
of bake time.
Bake time can be increased if required.
Press time key (8), then up/down keys (2) to
add more time amount required. Press time
key (8) then start (3).
(7) • NOT USED ON NON-STEAM OVEN
(6) • NOT USED ON NON-STEAM OVEN
(5) • Program number/bake cycle indicator.
Display will alternate between program
number and the spinning bake cycle
indicator.
6 Press STOP key (4) when
“bake over” alarm sounds
1
9
8
7
6
5
4
2
3

Mono Bx Series Specifications

General

Brand	Mono
Model	Bx Series
Category	Oven
Language	English