Monogram 1956 Chevrolet Bel Air User Manual

Gloss Black
Chevy Engine Red
Silver
White
Flat Red
Aluminum
Steel
Semi Gloss Black
This paint guide is provided to complete this kit
as shown on the box.
Ce guide de peintures est fourni pour reproduire le modèle
réduit qui apparaît sur la boîte.
Noir brillant
Rouge moteur Chevy
Argent
Blanc
Rouge mat
Aluminium
Acier
Noir satiné
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star (★) to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile (★) pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente peu
concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture bien sécher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son
support en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
'56 CHEVY
®
BEL AIR
®
KIT 0881 85088100200
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell Inc Consumer Service Department, 1850 Howard Street Unit A, Elk Grove Village, Illinois 60007
Be sure to include the plan number (85088100200), part number, description, your return address and phone number.
Visit our website: www.revell.com
Revell Inc Elk Grove Village, IL. Copyright © 2010. All rights reserved.
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* DECAL
* DECAL COMANIE
* OPTIONAL PARTS
* PIECES EN OPTION
* REPEAT PROCEDURE
* R E P E T E Z L E P R O C E D E
* ASSEMBLY CAUTION
*ATTENTION D ASSEMBLEE
``` `
``
The 1956 Chevrolet
®
Bel Air sport
coupe is recognized as a mod-
ern day classsic and a true col-
lectible automobile. Many modifica-
tions were made to the Chevy V-8
engine and it has been transformed
into one of the most popular high
performance street engines ever.
Your Monogram model features a
factory installed Corvette
®
V-8 with
dual four barrel carbs or optional
supercharger, bucket seats, roll bar,
alloy wheels, a pro stock hood scoop,
optional stock or raised rear axle and
decals with colorful custom graphics.

Monogram 1956 Chevrolet Bel Air Specifications

General

Brand	Monogram
Model	1956 Chevrolet Bel Air
Category	Toy
Language	English

Summary

Before You Begin and Decal Instructions

Preparation and Assembly Tips

Guidance on studying drawings, part identification, washing plastic, checking fit, using cement, and drying paint.

Decal Application Procedure

Step-by-step instructions for cutting, dipping, placing, and drying decals for optimal adhesion.

Engine Assembly Guide

Stock Engine Components

Details and callouts for parts of the stock engine assembly, including carburetor and cylinder heads.

Custom Engine Components

Details and callouts for parts of the custom engine assembly, including blower and velocity stacks.

Suspension Assembly Guide

Stock Suspension Components

Diagram and callouts for stock suspension parts like rear axle, shocks, and riser blocks.

Custom Suspension Components

Diagram and callouts for custom suspension parts including custom rear axle cover and springs.

Interior Assembly and Details

Engine and Chassis Integration

Shows the completed engine assembly connecting to the chassis with exhaust and driveshaft.

Interior Color Details

Notes on painting interior details for two-tone color schemes, specifying paints for dashboard and seats.

Interior Assembly Process

Stock Interior Components

Assembly of stock interior parts including seats, dashboard, and steering column.

Custom Interior Components

Assembly of custom interior parts like custom seats, roll bar, and shifter.

Radiator and Hood Assembly

Stock Radiator and Hood

Assembly of stock radiator, battery, and hood with hinges.

Custom Radiator and Hood

Assembly of custom radiator, battery, hood, and hood scoop.

Wheel and Final Assembly

Wheel Assembly Details

Instructions for assembling stock and custom wheels, including tires and retainers.

Final Assembly Steps

Steps for attaching headlights, windows, antenna, grille, bumpers, and taillights to the body.

Decal Placement Guide