Need help?Do you have a question about the Monoprice SWA-400 and is the answer not in the manual?
Provides details on the amplifier's front panel controls and display.
Details the various input, output, and connection ports on the amplifier's rear.
Presents a visual map of the DSP menu structure and available parameters.
Offers in-depth explanations for each function and parameter within the DSP menu.
General| Bass boost | -12 - -48 dB |
|---|---|
| Phase shift | 0 - 180 ° |
| Output level | 3 mV |
| Amplifier class | - |
| Output impedance | 4 Ω |
| Input sensitivity | 190 mV |
| Audio output channels | 2.0 channels |
| Peak power per channel | 1000 W |
| Signal-to-Noise Ratio (SNR) | - dB |
| Total Harmonic Distortion (THD) | 1 % |
| RMS power output per channel (4 Ohm) | 400 W |
| AC (power) in | Yes |
| Audio (L/R) in | 1 |
| Line inputs (RCA) | 2 |
| Speakers connectivity type | RCA |
| Purpose | Home |
| Product color | Black |
| Low pass filter range | 60 - 150 Hz |
| Connectivity technology | Wired |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power protection features | Overheating, Short circuit |
| Power consumption (typical) | 600 W |
Weight and Dimensions| Depth | 240 mm |
|---|---|
| Width | 435 mm |
| Height | 45 mm |
| Weight | 3460 g |
To Next Page
