Need help?Do you have a question about the Monoprice Monolith and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Input Impedance | 47k ohms |
| Amplifier Class | A/B |
| Signal-to-Noise Ratio | >110dB |
| Inputs | RCA |
Lists crucial safety guidelines for device operation, handling, and environmental considerations.
Highlights core functionalities including DAC, amplifier modules, Dirac, and connectivity options.
Identifies and describes the controls and display on the front of the device.
Details the input and output ports located on the rear of the device.
Explains connecting headphones via balanced XLR or unbalanced 1/4" jacks.
Describes connecting the RCA Pre-Amplifier Output to external audio equipment.
Details connecting analog audio sources using RCA cables.
Explains connecting digital audio sources via a coaxial cable.
Details connecting digital audio sources via an optical TOSLINK cable.
Explains connecting digital audio sources via an AES/EBU XLR cable.
Details connecting computers and audio playback via USB.
Instructions for turning the amplifier on and off using the Menu Button.
Steps to select the audio input source using the device controls.
How to adjust the audio volume level using the Value Knob and its display.
Detailed steps for adjusting Shelf EQ's LF/HF Gain and Frequency parameters.
Completes the adjustment of Shelf EQ parameters like HF GAIN and FREQ.
Guides on setting PEQ frequency, gain, and Q values for precise audio tuning.
Steps for configuring DRC Threshold, Ratio, and LF Offset values.
Covers DAC/ADC filters, reset options, software version, and usage recommendations.
To Next Page
