Monoprice Monolith - Analog RCA Input; Digital Coaxial Input

9
Analog RCA Input
You can connect an analog audio source device to the RCA Unbalanced Analog Audio
Input using a pair of RCA cables (available separately).
Digital Coaxial Input
You can connect a digital audio source device to the Coaxial Digital Audio Input using a
digital coaxial cable (available separately). The digital signal will be converted by the
internal DAC and sent to the analog headphone and pre-amplifier outputs.
 The Coaxial Digital Audio Input accepts only stereo PCM signals. Compressed and
multichannel audio signals, such as Dolby Digital™ and DTS®, are not supported.