Monroe Classic User Manual

Date/Time Clock Functionality
Addressable – Set Up, #/Date
II*
Change Sign
I*
Date/Time
Stamp
II♦
End
I♦
M ↔ Dec
II-
Start
I-
Days
II+
Compute
I+
HH.MM
Date/Time Clock Functionality is addressable after depression of the Set Up key followed by a depression
of the #/Date key. Enabling this feature changes the operation of Memory I and Memory II to the
alternative functionality identified above and described below:
Set or Change the Date and Time
Example: December 1, 2002 – 8:30am
Enter Press Display Print
12.01.2002.8.30 Date/Time Stamp 12.01.2002 8.30 12 01 2002 8 30
When printed, date and time print on the same line, date formatted and left justified and time formatted
and right justified. The line prints in red.
If, in the above example the time was 8:30pm, the following sequence of key depressions would be used.
Enter Press Display Print
12.01.2002.8.30 Change Sign 12.012002830
Date/Time Stamp 12.01.2002 8.30 12 01 2002 8 30 P
When entering time, a positive value assumes the entry to be AM, while a negative value assumes PM.
This convention eliminates the necessity of using military time.
Print/Display Date and Time
Enter Press Display Print
No Live Entry Exists Date/Time Stamp 12.01.2002 8.30 12 01 2002 8 30
Convert Minutes to Decimal Equivalent
Enter Press Display Print
8.30 HH.MM 8 30 8 30
M ↔ Dec
8.50 8.50

Monroe Classic Specifications

General

Brand	Monroe
Model	Classic
Category	Calculator
Language	English