Monster Moto MM-E250 User Manual

This operator’s manual contains important safety informaon and maintenance
informaon. Read it carefully before using this vehicle. Failure to follow the warnings
contained in this operator’s manual could result in INJURY or DEATH.
Keep this manual in a safe place. It is very important that this owner’s manual be
reviewed by all riders and it should be considered a permanent part of the mini bike
and should remain with the vehicle when transferred to a new owner.
This manual contains the latest product informaon available before prinng. Due to
product improvements or producon changes, there could be discrepancies between
the informaon contained in this manual and accurate product informaiton. Monster
Moto, LLC (Monster Moto) reserves the right to make changes to its products at any me,
without noce and without obligaon to make the same or similar changes to any vehicle
previously built or sold.
No part of this publicaon may be reproduced or copied without wrien permission
from Monster Moto.
© Monster Moto, LLC, 2013
Owner’s Manual
Monster Moto, LLC
1001 S. Jupiter Rd.
Garland, TX 75042
Phone: 855-833-6483
All rights reserved. © 2013
MADE IN CHINA
MM-E250
Electric Mini Bike

Monster Moto MM-E250 Specifications

General

Starting System	Electric
Front Brake	Disc
Rear Brake	Disc
Motor	250W
Tires	12-inch

Summary

Warranty Information

Warranty Coverage, Exclusions, and Liability

Details what is covered, not covered, and the limitations of liability.

Owner's Maintenance and Record-Keeping Duties

Important Safety Information

Safety Symbols, Signal Words, and Definitions

Defines DANGER, WARNING, CAUTION signal words and their meanings.

Key Safety Precautions for Riders

Rider Attire, Protective Gear, and Riding Environment

Stresses the importance of helmets, gear, and safe riding surfaces.

Rider Age, Supervision, and Riding Restrictions

Covers passenger policy, skill limits, parental supervision, and off-road use.

Operating Controls and Component Identification

Initial Setup and Battery Charging

First-Time Battery Charging Procedure

Pre-Ride Inspection Checklist

Essential Safety and Functional Checks

Lists critical checks for loose parts, frame, tires, brakes, charger, and safety gear.

Basic Operation: Power and Speed Control

Basic Operation: Riding and Post-Ride Procedures

Basic Maintenance: Brake System

Adjusting the Rear Brake Lever and Cable

Basic Maintenance: Drive Chain

Chain Inspection and Tension Adjustment

Basic Maintenance: Tires and Electrical

Tire Pressure Check and Fuse Replacement

Basic Maintenance: Battery System

Battery Replacement Procedure

Troubleshooting Common Issues

Bike Not Running or Stopping Problems

Diagnoses issues with power, fuses, connections, and braking.

Troubleshooting Performance Issues

Short Run Time and Poor Performance Diagnosis

Addresses causes for reduced battery life and overall poor performance.

Troubleshooting Operational Problems

Brake, Noise, and Speed Adjustment Issues

Solves problems with stopping, noises, and slow running.