AVS 2000 FEATURES
1. Unswitched Outlets: Provide power to components
or Monster PowerCenters regardless of the status
of the Sequential Power On/Off button (10).
2. Switched Outlets: Provide power to connected
components only when the Sequential Power On/Off
button (10) is initiated.
3. Delay Programming: Sets the powerup delay time
for the switched outlets (see Fig.3, below left).
4. 3-30v DC In: Allows AVS 2000’s “power on” function
to be controlled by other remote enabled units
(such as the Monster Power
®
Home Theater
Reference HTS 5000 PowerCenter).
5. 6-12v DC Out: Allows AVS 2000
to control other remote enabled units
“power on” function.
6. Thermal Circuit Breaker: Protects the AVS 2000
from power overload.
7. Ground Post: Provides a ground reference point
for ungrounded components.
Figure 2
AVS 2000 – BACK PANEL
1
3
2
7
4
5
6
To Next Page
