Need help?Do you have a question about the Monster Power MPA 2250 and is the answer not in the manual?
Warnings on power sources, cord protection, grounding, and shock hazards.
Details MMAT™ technology, circuit innovations, and design goals.
Explains power supplies, output, meters, and clean AC power importance.
Essential items for setup and safe unpacking procedures.
Covers ventilation, AC power, and audio cable best practices.
Steps for installing rack ears and brackets.
Details RCA/XLR inputs, speaker wiring, and remote trigger setup.
AC Power Receptacle, Voltage Switch, Input Type Switch, Remote On/Off.
Amplifier Inputs, Speaker Terminals, Fuses, Grounding.
Step-by-step guides for RCA and XLR input connections.
AC Power, Voltage Switch, Input Type, Bridging, Fuses, Grounding.
Instructions for connecting speakers and remote trigger cables.
Step-by-step guides for RCA and XLR input connections.
Configuration for bridged mono operation including switch settings.
Explains power meters, power indicator, and full power indicators.
Details Center Display Selection, Power Button, and Meter Dimmer.
Explains power meters, power indicator, and full power indicators.
Details the Power Button and Meter Dimmer Control.
Addresses issues like no power, no sound, or incorrect channel sound.
Visual guides for connecting both amplifier models to a system.
General| Channels | 2 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | <0.1% |
| Signal-to-Noise Ratio | >100 dB |
| Damping Factor | >200 |
| Input Voltage | 120V |
To Next Page