Do you have questions? Call us @ 877.778.6937 Monday – Friday, 8am-5pm EST
2021 Monster Tower All Rights Reserved 2640 Byington Solway Rd, Knoxville, TN 37931 877.778.6937 monstertower.com
c
DES-192
REV 1.0
Step 5: Attaching Tension Arms to Tower
Make sure the NON
-
THREADED HOLE on
the swivel mount is FACING OUTSIDE. Align
and attach both back metal bow legs to the
swivel mounts.
At the front of the tower, locate the support
poles and align them with the fixed angle
mounts. Thread the knob in from the bottom.
Hardware Needed:
1.
2.
6
To Next Page
Loading...
