9
Follow below steps to mount the sound bar on the wall
1. Make 2 holes on the wall with distance same as the wall bracket on the soundbar
2. Put the plastic anchors onto the wall and secure the screws to the plastic clip, do not tighten
the screws all the way make sure leave some space
3. Attached the 2 EVA pads onto the wall mount backet. This will make sure that there is enough
room between the wall and the soundbar outlet, minimum 15mm
4. Once the screws securely fastened, hang the sound bar over by inserting the screws onto the
wall mount bracket
To Next Page
