2
HELMETS
SAVE
LIVES!
Always wear a properly tted
helmet that complies with CPSC or
CE safety standards when you ride
your bicycle.
Great care should be taken when
locking the quick release levers on the
bicycle. If you do not fully understand
how to operate the quick release
levers, ask a bicycle dealer for
assistance, or call Montague’s
Customer Support Team at
+1 617-491-7200.
DO NOT RIDE YOUR BICYCLE
WITHOUT ALL QUICK RELEASES
SECURELY LOCKED.
WARNING
In this manual, the WARNING sign
shows a hazardous situation which,
if not avoided, could cause death or
serious injury.
WARNING
In this manual, the CAUTION sign
shows a hazardous situation which,
if not avoided, could cause minor or
moderate injury.
CAUTION
As with all mechanical components, the bicycle is subjected to wear and high
stresses. Dierent materials and components may react to wear or fatigue in
dierent ways. If the design life of a component has been exceeded, it may
suddenly fail possibly causing injuries to the rider. Any form of crack, scratch or
change of colouring in highly stressed areas indicate that the life of the component
has been reached and it should be replaced. Do not ride in an abusive manner.
WARNING
Correct Fitting - Make sure
your helmet covers your
forehead.
Incorrect Fitting - Forehead
is exposed and vulnerable to
serious injury.
To Next Page
Loading...