MONTAGUE M-E1 - Attaching Steering Damper Spring; Installing the Seatpost; Warning: Seatpost Height Danger

32
Installing the Seatpost
1. Open the seatpost quick release
lever (Figs. 24 & 25).
2. Insert the seatpost into the seat
tube to a su󰀩cient depth so that the
minimum insertion line is no longer
showing (Fig. 25).
Attaching the Steering Damper
Spring
A steering damper spring is included
to keep the fork and handlebars from
turning on their own and falling to one
side when the bike is parked. It does not
a󰀨ect handling of the bike while riding.
The spring can be found in the small
parts box. To attach it:
1. Loop the hook on one end of the
spring through the eyelet on the
underside of the frame’s top tube.
It is located directly behind the fork
arch (Fig. 23, a).
2. Using a pair of pliers to grip the hook
on the opposite end of the spring,
stretch the spring toward the fork
arch. This requires considerable
force, so be sure the pliers have a
secure grip on the spring.
3. Insert the hook end into the opening
in the L shaped bracket attached to
the fork arch (Fig. 23, b).
ASSEMBLING YOUR MONTAGUE BICYCLE CONTINUED
Open
Closed
Adjustment
Nut
Fig. 24: Opening and adjusting a quick release.
A seatpost that is too high can cause
damage to your e-bike or decrease
your control and cause you to fall.
Make sure the minimum-insertion line
is in the frame (Fig. 25).
WARNING
Fig. 22: Mounting bolt on fork lower Fig. 23: Steering damper spring
A
B