Need help?Do you have a question about the Montech MonTurn TB40 and is the answer not in the manual?
General| Model | MonTurn TB40 |
|---|---|
| PWM Control | Yes |
| Power Connector | SATA |
| Input Voltage | 12V |
| Addressable RGB Support | Yes |
| Output Voltage | 12V |
| Protection Features | Over Current Protection |
| Certification | CE, RoHS |
Declaration of conformity with EC Machinery Directive requirements.
Lists essential health and safety requirements from the EC Machinery Directive.
Details required characteristics for guards and protective devices.
Outlines risks associated with electricity, temperature, fire, noise, etc.
Covers machinery maintenance procedures and access.
Provides information and warning details on the machinery.
Details information provided within the manual for users.
Explains the meaning and usage of symbols in safety instructions.
Disclaimer regarding the use and interpretation of manual information.
States copyright protection for the manual's content.
Refers to the warranty terms and conditions available from the manufacturer.
Provides information on how to contact customer service for technical support.
Warns against damage from incorrect transport procedures.
Instructions for checking shipments for completeness and damage upon delivery.
Describes packaging used for protection and environmental considerations.
Guidelines for disposing of packaging material responsibly.
Specifies conditions for storing packages to maintain product integrity.
Defines the intended purpose of the Control Unit MonTurn and misuse.
General safety instructions and warnings to be followed during operation.
States that misuse voids the warranty claim.
Prohibits unauthorized modifications to maintain safety and performance.
Details required personal protective equipment (PPE) for safe work.
Outlines necessary qualifications for personnel performing tasks.
Lists technical specifications such as ambient temperature, voltage, and materials.
Provides general information on the function and connection methods.
Explains the function of the front panel controls (Direction, Velocity).
Presents detailed dimension drawings of the MonTurn unit and its connections.
Details the information found on the device's nameplate.
Provides safety warnings and steps for installation and initial setup.
Offers warnings about lubricants and procedures for assembly/disassembly.
Details how to mount the control unit to the conveyor using fasteners.
Details the electrical connections required for the MonTurn unit.
Describes different versions of the MonTurn and their included components.
Provides information on the cable sets available for MonTurn connections.
Details pin assignments and specifications for the TB40 power cable.
Details pin assignments and specifications for the MonTurn power cable.
Details pin assignments for the signal cable between TB40 and MonTurn.
Illustrates the power and logic signal behavior during startup and shutdown.
Explains the requirement for PLC speed mode parameterization for operation.
Describes how to set belt speed using the rotary switch and analog setpoint.
Outlines the recommended maintenance schedule and tasks.
Warns about using incorrect spare parts and advises on OEM parts.
Advises contacting customer service for repairs and observing safety instructions.
Provides safety warnings and steps for proper disassembly procedures.
Guides on disassembling and disposing of the unit and its components environmentally.
To Next Page
