Section
1.
Installation
Remove all packaging, protective film and securing tape from
the appliance.
Position the appliance in a dry atmosphere.
The following dimensions are provided as a guide for
installation – your installer will carry out the installation in
accordance with the current regulations.
Your installer will connect the power cable in accordance with
the current regulations.
1.1. Positioning the Appliance
Position the appliance as shown in the diagram below.
Ensure an air gap of at least 2cm on all sides of the appliance.
You must ensure a minimum gap of 65cm between the top of
the appliance and a cooker hood. The gap must be 70cm if
there is no cooker hood installed above the appliance.
To Next Page
Loading...
