Cathodic protection
All yachts are fitted with hull mounted sacrificial anodes as these give the best
results. These are usually mounted
in
the region of the engine compartment
to
keep
the bonding cable run to a minimum.
Attachment
This is achieved by using studs permanently fixed to the inside of the hull to which
the anode is secured using nuts and locking washers.
Bonding
Bonding cables are internally attached to the mounting studs. The anode is bonded
to the engine, stern tube, rudder stock and
T'
bracket. There is no requirement for
the more remote skin fittings and seacocks or the keel mounting bolts to be
protected.
Hatches
and
portlights________________________________
All yachts use the following range of
Lewmar
hatches and portlights;
Moody 31
Quantity
2
1
Type
Portlight
Hatch
Manufacturer
Vetus
Lewmar
Model No.
PT100
(White)
86005S
Size (")
123/8x51/2
19 3/4 X 19 3/4
Moody 336
Quantity
1
1
2
2
1
1
Type
Portlight
Portlight
Portlight
Hatch
Hatch
Hatch
Manufacturer
Lewmar
Lewmar
Lewmar
Lewmar
Lewmar
Lewmar
Model No.
8906
8912
8932
82005S
86005S
83005S
Size
(")
4x10
5x12
5x15
7 3/4 X 13
3/8
193/4X193/4
15
5/8
X 17 3/4
Issue 3
Page 1.3
To Next Page
Loading...