Need help?Do you have a question about the Mooer GE250 and is the answer not in the manual?
Covers power supply, connections, care, location, and FCC certification for safe operation.
Controls for banks, presets, effect blocks, and rhythm.
Buttons for system settings, saving, global EQ, and value editing.
Master volume knob, output jacks, display, and built-in expression pedal.
AUX IN, EXP2, IN, SEND, RETURN, OUTPUT, PHONES.
USB, MIDI IN/OUT, I/O switch, DC IN, Cable Tidy.
Balanced XLR output with GND/LIFT switch.
Shows EXP1, EXP2, and CAB SIM THRU status.
Displays preset number, name, volume level, and BPM.
Indicates DSP resource usage and the current effects chain.
Connect to full range, flat response speaker cabinets.
Setup for 4-cable method and connecting to amplifier input/FX loop.
Connecting to powered speakers or amplifiers.
Setting up connections and adjusting master volume.
Adjusting effect blocks, their order, and parameter values.
Steps to save current settings as a new preset.
Connect amp, enter system settings, and select monitor mode.
Adjust tone, monitor target/source, and start capture.
Save the sampled amp model to a slot.
Press footswitches A+B to start the tuner.
Shows nearest note, calibration, and pitch accuracy.
Select between RHYTHM (drum machine) and METRONOME.
Adjust style, BPM, volume, and use TAP TEMPO.
Adjust PLAY, REC, and PRESET levels.
Control recording, playback, overdub, reverse, half speed, and clearing loops.
Activate drum machine and looper together for practice.
How the looper aligns with the drum machine bar using Rhythm Justify.
Enter the GLOBAL EQ screen and toggle outputs on/off.
Set LOOP MODE, DRY/WET mix, and SEND/RETURN levels.
Calibrate the built-in or external expression pedal.
Configure pedal for volume control or wah effect.
Control multiple parameters simultaneously with the EXP pedal.
Define heel-down and toe-down values for parameters like DELAY time and feedback.
Select NA, ON/OFF, or TAP for the CTRL footswitch.
Assign effects blocks to be toggled by the CTRL footswitch.
Input Level, USB Audio, MIDI, Cab Sim, Trail, Looper Mode.
Specific settings for TONE CAPTURE and TAP TEMPO functions.
Adjust screen brightness and perform factory resets.
Lists of Wah, Phaser, Compressor, Delay, Noise Gate, and Drive/OD effect models.
Extensive lists of amplifier and cabinet models.
Detailed explanation of parameters for various effect types.
Details on Delay, Reverb, EQ, and NS effects models and parameters.
Number of effect types, total effects, and presets.
Details on impedance, connectors, MIDI, and USB.
IR format, power supply, dimensions, weight, and accessories.
General| Type | Multi-Effects Processor |
|---|---|
| Amp Modeling | Yes |
| IR Support | Yes |
| Expression Pedal | Yes |
| USB | Yes |
| Inputs | 1/4" instrument input |
| Outputs | 1/4" outputs, Headphones |
| Effects | Yes |
To Next Page