Moog ETHERWAVE THEREMIN User Manual

8
UNPACKING AND INSPECTION
Be careful when unpacking your new Moog Etherwave Theremin so that nothing is lost or damaged.
We recommend saving the carton and all packing materials in case you ever need to ship the
instrument for any reason.
Etherwave Theremin ships with the following items:
Etherwave Theremin
Pitch Antenna (Straight Tube)
Volume Antenna (Loop Tube)
Microphone Stand Adapter (attached)
Calibration Tool
Power Supply
User’s Manual
Registration Card
What you will need:
A standard microphone stand, Moog theremin stand, or a non-metallic surface (free of metal
supports or accents) capable of supporting your Etherwave Theremin.
A 1/4” instrument cable and amplified speaker, or headphones with a 1/4” plug.
A properly wired and grounded AC outlet.
NOTE: The player’s entire body acts as the ground in the LC (Inductance/Capacitance) circuitry at the heart of
Etherwave Theremin; therefore, a properly grounded connection is required for stable operation.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
3.

Moog ETHERWAVE THEREMIN Specifications

General

Type	Theremin
Pitch Antenna	Vertical
Volume Antenna	Horizontal loop
Pitch Range	5 octaves
Sound Source	Analog oscillator
Outputs	1/4" audio out
Controls	Volume, pitch, waveform, brightness