Moog Matriarch - Oscillator Patch Points

MAKE THIS CONNECTION
Patch Oscillator 2’s WAVE OUT output to an ATTENUATOR input and the
ATTENUATOR output to Oscillator 1’s LIN FM IN input.
Now you can use the attenuator to dial in the depth of frequency modulation. You can
even invert Oscillator 2 by moving the ATTENUATOR knob counterclockwise past noon,
but in the case of this patch it doesn’t make much of a difference.
A major feature of FM synths is dynamic depth FM synthesis—where the depth
of modulation will vary over time—usually controlled by an envelope. Matriarch’s
attenuators easily let us achieve this since their CV inputs make them voltage controlled
ampliers! We will take the amplitude envelope and use that to control the depth of FM.
2-Operator Analog FM Synthesis | 16