Need help?Do you have a question about the Moog Mother-32 and is the answer not in the manual?
General| Type | Semi-modular analog synthesizer |
|---|---|
| Envelopes | ADSR envelope generator |
| Oscillator | 1 x VCO with pulse and sawtooth waveforms |
| Filter | 20Hz-20kHz Moog Ladder Filter with resonance |
| LFO | Low-frequency oscillator with triangle and square waveforms |
| Sequencer | 32-step sequencer |
| Patch Points | 32 x 3.5mm patch points |
| Power | 12V DC power supply |
| MIDI | MIDI input |
Connects the power adapter to the Mother-32 and an AC outlet.
Connects the Mother-32's audio output to speakers or a mixing console.
Illustrates the signal path from sound sources through modifiers to output.
Explains the VCO and White Noise generator as sound sources.
Details the function of the VCF and VCA in shaping sound.
Details the FREQUENCY, VCO WAVE, and PULSE WIDTH controls.
Explains modulation sources, amount, and destination for the VCO.
Details the LFO's function and controls.
Explains the voltage-controlled mixer in the audio path.
Details the VCF controls and modes.
Explains VCF modulation controls.
Explains the EG controls.
Explains the VCA controls.
Describes the 13-note keyboard and its functions.
Introduces the step sequencer and its controls.
Describes the MIDI IN port and its functions.
Explains the VC Mix module.
Details the patchbay inputs and outputs.
Explains basic sequencer operation and steps.
Describes Keyboard (KB) and Step modes.
Explains how to activate the pattern recording function.
Instructions for entering a note into a pattern step.
Adjusts the duration a note is held within a step.
Adds emphasis to a specific pattern step.
Controls the glide effect for a step.
Adds a rest to a specific pattern step.
Adds note repeats (ratchets) to a step.
Exits the pattern recording mode.
Starts and plays the programmed pattern.
Temporarily stops pattern playback.
Adjusts the timing of off-beats for rhythmic feel.
Temporarily adds accents during playback.
Temporarily mutes steps during playback.
Transposes patterns using octave and keyboard.
Guides on selecting and editing individual pattern steps.
Selects the bank where a pattern will be saved.
Finalizes or aborts the saving process.
Guides the user to enter Step mode for pattern editing.
Sets the tempo for the sequencer.
Defines the total number of steps in a pattern.
Inserts rests at specific steps in a pattern.
Instructions for editing note values in a step.
Exits the step editing mode.
Adds ratchets to a specific pattern step.
Rotates pattern steps to alter rhythmic feel.
Guides the user to enter Step mode.
Details how to edit note values in Step mode.
Selects a bank for saving or loading patterns.
Selects a pattern to load or save.
Procedure for saving patterns to memory.
Loads a previously saved pattern.
Resets the current pattern to default values.
Explains how to switch between Keyboard and Step modes.
Details core sequencer control functions.
Temporarily mutes steps during playback.
Temporarily adds ratchets during playback.
Adjusts the swing parameter.
Controls octave and keyboard functions when sequencer is off.
Transposes patterns using octave and keyboard.
Activates record mode for pattern entry.
Turns glide on or off for a step in KB mode.
Sets ratchet value for a step in KB mode.
Selects and edits steps in KB mode.
Sets the last step of a pattern in KB mode.
Selects pattern pages in Step mode.
Toggles individual steps on or off in Step mode.
Sets the last step of a pattern in Step mode.
Rotates pattern steps in Step mode.
Selects a step for editing in Step mode.
Edits note values in Step mode.
Turns glide on or off for a step in Step mode.
Input for external sound sources.
Explains VCA CV input and output.
Details VCF patchbay connections.
Details VCO patchbay connections.
Details VCO patchbay connections.
Details LFO patchbay connections.
Details LFO patchbay connections.
Details VC Mix patchbay connections.
Details VC Mix patchbay connections.
Details the multiple signal splitter.
Details the programmable assignable output.
Details EG patchbay connections.
Explains keyboard CV and gate signals.
Explains clock signals for sequencing.
Explains clock signals for sequencing.
Setting the MIDI channel for communication.
How MIDI Note On messages are processed.
How program changes affect pattern selection.
Real-time MIDI messages like Clock, Start, Stop.
Mode for configuring features like MIDI channel and tempo input.
Configuring the assignable output source.
Setting the MIDI channel.
Step-by-step calibration process.
Steps to install the module in a Eurorack case.
A specific preset sound example.
A specific preset sound example.
A specific preset sound example.
Specifications related to Eurorack installation.
Lists available accessories for purchase.
Details the standard warranty policy.
Procedure for returning a product for service.
How to start the warranty process.
To Next Page
