Moog One User Manual

This manual is a living document that will be updated frequently.
Please visit www.moogmusic.com/moogone to nd the most
up to date manual. If you are having trouble nding specic
information about your Moog One in this manual please email:
moogonemanual@moogmusic.com for assistance.
THIS VERSION WAS PUBLISHED ON 1/10/19.
Revisions made to:
Page 52 - Spread Parameter
Page 100 - Stereo Width
Page 129 - Noise Reduction

Moog One Specifications

General

Keyboard	61-note Fatar TP-8S with velocity and aftertouch
Arpeggiator	Yes
Polyphony	8 or 16 voices
Oscillators	3 per voice
LFOs	4 per voice
Envelopes	3 per voice
Sequencer	Yes
Connectivity	MIDI In/Out/Thru, USB, CV/Gate
Weight	45 pounds (20.4 kg)
Filter	2 filters per voice: a state-variable filter and a Moog ladder filter

Summary

Unpacking and Inspection

Setup and Connections

Instructions for powering the instrument and connecting it to an audio monitoring system.

Connecting the Power Supply

Details on how to connect the power adapter and supply to the instrument.

Audio Monitoring

Guidance on connecting audio outputs to speakers or headphones for monitoring.

Moog One Overview

Piloting Moog One

Front Panel

Overview of the instrument's primary interface with immediate parameter access.

Left and Right Panel Controls

Details dedicated hardware knobs and buttons grouped by module type.

Keyboard

Left Hand Controller

Features enhancing playability and expression, including wheels and touchpad.

Oscillators

Mixer

Filters

State Variable Filter (SVF)

Details the SVF's construction and modes like Notch, Bandpass, High Pass, Low Pass.

Envelopes

Low Frequency Oscillators

VCA and Output

VCA Section

Voltage Controlled Amplifier parameters: Level and Pan.

Performance Set

Assigning Presets to Performance Sets

Steps to assign the current preset to a location in the active Performance Set.

Master Clock

Voice Allocation

Chord Function

Allows stacking multiple notes to create chords or custom interval patterns.

Modulation

Hard-Wired Modulation

Provides immediate control for common modulation pathways via dedicated hardware.

Hard-Wired Oscillator Common Modulation Parameters

Controls pitch and waveform modulation applied equally to all oscillators.

Modulation Matrix

Editing or Creating a New Modulation Path

Guides on selecting slots, sources, destinations, and parameters for modulation.

Arpeggiator

Sequencer

Effects

Understanding Synth Effects

Details on applying individual effects per synth and their controls.

Synth Effect Structure

Explains how synth effects are classified, loaded, and saved.

Master Effects

Understanding Master Effects

Describes master effects available to all synths, including Eventide effects.

Left Hand Controller Functions

The Browser

Using the Browser

Loading a Preset

Procedure for searching and loading presets based on criteria and tags.

Loading a Timbre

Instructions for loading individual synth timbres into the active synth.

Editing and Saving

Compare Function

Compares current edits to the original saved version without reloading.

Snapshot Feature

Enables micro-saves of current preset edits for easy rollback.

Settings

Hardware Settings

CV Inputs

Sustain Pedal Input

Determines how the instrument reacts to sustain and sostenuto pedals.

Utilities

Restore Default Settings

Resets all settings to factory defaults without affecting presets.

Update Firmware

Instructions for updating the instrument's firmware via USB.

Library Management

Exporting Data

Selectively copy data (Presets, Sequences, etc.) to an external USB drive.

Importing Data

Selectively load data (Presets, Sequences, etc.) from a USB drive.

Specifications

Service and Support Information