134
CV INPUTS
Moog One MIDI and CV implementation will be greatly expanded over the coming weeks. New features
are actively in development and will be ready soon. These will include: analog clock input and output,
CV Pitch/Gate functionality, MIDI Clock output, and full MIDI CC and NRPN input and output.
Please register your instrument at www.moogmusic.com/register to receive the latest rmware updates
as they become available.
Moog One is equipped with ve 1/4” TS Control Voltage (CV) Inputs on the rear panel – CV IN 1 and CV
IN 2, plus the PEDALS inputs for Expression – EXP 1, EXP 2, and SUSTAIN. All of these inputs can be
congured to work with a variety of CV sources, from expression pedals to other modular, Eurorack,
and standalone synthesizers.
LOAD FROM PRESET (OFF, ON)
The CV INPUT settings made here can be saved as part of the current Preset. By setting the LOAD
FROM PRESET parameter to On, these setting will be restored each time the Preset is loaded. With the
LOAD FROM PRESET parameter Off, the CV INPUT settings will remain in their current conguration.
CV IN 1; CV IN 2; EXP IN 1; EXP IN 2; PARAMETERS
The parameters listed below are identical for every CV INPUT; however, they are set individually using
a repeating format for each CV INPUT.
FUNCTION
This parameter selects the function/destination of the incoming control voltage signal arriving at the
chosen jack.
CV INPUT DESTINATIONS
SUSTAIN IN
This feature is used to determine how Moog One will react to varying types of sustain pedal.
FUNCTION (OFF, SUSTAIN PEDAL, SOSTENUTO PEDAL)
When set to SUSTAIN PEDAL, all notes played when a Sustain pedal his held will be sustained for as
long as the pedal is held. When set to SOSTENUTO PEDAL, only the notes that are being held when
the Sostenuto pedal is pressed will sustain. Subsequent notes that are played after the Sostenuto pedal
is already held down do not sustain.
SYNTH (SYNTH 1, SYNTH 2, SYNTH 3, SYNTH 1 & 2, SYNTH 1 & 3, SYNTH 2 & 3, ALL SYNTHS)
This parameter species which Synth the Sustain Pedal is being applied to. It can be applied to all
three Synths, an individual Synth, or any combination of two Synths.
SWITCH TYPE (Open and Closed)
This parameter allows Moog One to easily work with varying types of sustain pedals. The two options
are OPEN and CLOSED, which adapt the Sustain Input to the two common types of pedal (normally-
open or normally-closed).
NONE
NEXT PRESET
PREVIOUS PRESET
NEXT SET
PREVIOUS SET
To Next Page
Loading...
Need help?
General
