Need help?Do you have a question about the Moog Minitaur and is the answer not in the manual?
General| Type | Analog Bass Synthesizer |
|---|---|
| Synthesis Type | Subtractive |
| Oscillators | 2 |
| Waveforms | Sawtooth, Square |
| Filter | Yes |
| Polyphony | Monophonic |
| LFO | 1 |
| CV Inputs | Pitch, Filter, Volume, Gate |
| Inputs | External Audio Input |
| Keyboard | No |
| USB | Yes |
| Filter Type | Low-pass |
| Envelopes | 2 |
| MIDI | Yes |
| Outputs | 1/4" Audio Output |
| Dimensions | 8.5 x 5.25 x 2.25 inches |
Connecting the editor to a Digital Audio Workstation for control and automation.
Managing presets directly on the Minitaur hardware via GET, SEND, AUTO SEND.
Choosing between Sawtooth and Square waveforms for VCOs.
Adjusting the pitch relationship between VCO 1 and VCO 2.
Controls for Glide Rate and enabling/disabling the Glide effect.
Explores Glide Types (LCR, LCT, EXP) and Legato behavior.
Adjusting levels for VCOs and external audio input.
Controls for Cutoff, Resonance, EG Amount, KB Tracking, and Vel Sens.
Controls for Attack, Decay/Release, and Sustain for Filter and Amplifier.
Controls for LFO Rate, VCO LFO Amount, and VCF LFO Amount.
Under The Hood LFO settings for MIDI Sync, Clock Divider, and Key Trigger.
Adjusting how MIDI note velocity affects the VCA level.
Setting up multiple Minitaurs for polyphonic operation.
Routing CV inputs (Pitch, Volume, Gate) to specific parameters.
Procedures for Note Calibration and Pitch CV calibration.
To Next Page
