Moog Minitaur User Manual

SETUP
Click the SETTINGS button to open the Settings window:
When connecting your Minitaur and computer via USB, set the MIDI Input and MIDI Output in the EDITOR SET-
TINGS section to “Moog Minitaur”.
Once these MIDI Input and Output settings are selected, the MINITAUR GLOBAL SETTINGS displayed in the editor
will update to reflect the current status of the connected Minitaur’s internal global settings.
Note: Changes made to the editor’s global settings are saved to the connected Minitaur’s internal memory.
ENV RELEASE MODE
The Envelopes’ Decay and Release stages can be linked together, or function independently, based on this setting.
KEY PRIORITY
The Key Priority can be set as a Global function, or as a KB RESPONSE Under the Hood parameter in each Preset.
CONT’D ON NEXT PAGE.
17
MINITAUR GLOBAL SETTINGS

Moog Minitaur Specifications

General

Type	Analog Bass Synthesizer
Synthesis Type	Subtractive
Oscillators	2
Waveforms	Sawtooth, Square
Filter	Yes
Polyphony	Monophonic
LFO	1
CV Inputs	Pitch, Filter, Volume, Gate
Inputs	External Audio Input
Keyboard	No
USB	Yes
Filter Type	Low-pass
Envelopes	2
MIDI	Yes
Outputs	1/4" Audio Output
Dimensions	8.5 x 5.25 x 2.25 inches