Moog Mother-32 - Sequencer Panel Function Quick Reference; Select Bank; Select Pattern; Saving a Pattern

32
SEQUENCER PANEL FUNCTION QUICK REFERENCE
SEQUENCER MEMORY AND LOADING A PATTERN
SELECT BANK
While holding (SHIFT)+PATTERN, use Step buttons 1-8, or the LEFT/RIGHT arrows to select a new bank.
SELECT PATTERN
While holding PATTERN, use Step buttons 1-8, or the LEFT/RIGHT arrows to select a new pattern.
NOTE: Unsaved changes to a pattern will be lost when a pattern location is changed, initialized,
or restored during normal operation.
SAVING A PATTERN
Hold (SHIFT)+RUN/STOP for 1 second. When the green
OCTAVE /LOCATION LED blinks, select a bank by pressing
(BANK)+Step button 1-8 or (BANK)+LEFT/RIGHT arrows.
Use the LEF T/RIGHT arrows to select pattern location 1-8.
Press (SHIFT)+RUN/STOP to complete the saving process.
Press RUN/STOP to exit without saving.
RESTORE A SAVED PATTERN
Press PATTERN+RESET.
INITIALIZE CURRENT PATTERN
Press (SHIFT)+RESET+PATTERN.
+ +
Or
+
Or
+
+
+
++