24
SEQUENCER PERFORMANCE FUNCTIONS
LIVE ACCENT
Press (SHIFT)+ACCENT during playback to temporarily add
an Accent to each step in a pattern. Live Accent overrides
stored Accent data and is only active when both buttons are
held. Live Accent data is not stored in memory.
LIVE MUTE
Press (SHIFT)+REST during playback to temporarily Mute
the output of the sequencer as it continues to advance. Live
Mute is only active as long as these buttons are held and is
not stored in memory.
LIVE RATCHET
While holding (SHIFT), rotate the GLIDE control to add 1-4
Ratchets to each step in a pattern. Live Ratchets will override
stored Ratchet data and are only active as long as (SHIFT) is
held. Live Ratchet data is not stored in memory.
LIVE PATTERN TRANSPOSE
Press the LEFT/RIGHT arrows to select an octave and use the Keyboard to transpose a pattern during
playback. The default octave setting is 4 and the default reference note is low C. Live transposition data
is not stored in memory.
+
+
+
To Next Page
Loading...
