Moog Mother-32 User Manual

PATCHBAY INPUTS AND OUTPUTS (Continued)
VC Mix
Multiple
Assignable Output
Envelope Generator
Keyboard
Clock/Tempo Input
MIDI FUNCTIONS AND IMPLEMENTATION
SETUP MODE
VCO CALIBR ATION
USING MOTHER-32 AS A EURORACK MODULE
PRESETS
BLANK PATCH SHEETS
SPECIFICATIONS
ACCESSORIES
SERVICE AND SUPPORT
UNPACKING AND INSPECTION
Check the contents of the shipping carton.
Be careful when unpacking your new Mother-32 so that nothing is lost or damaged. Moog recommends
saving the carton and all packing materials in case you ever need to ship the instrument for any reason.
The Moog Mother-32 ships with the following items:
Mother-32 Analog Synthesizer
Power Supply
Owner’s Manual
Quick Start Guide
Patch Cables
Registration Card
What you will need:
A table or at surface to set your Mother-32.
A 1/4” instrument cable and amplied speaker or headphones with a 1/4” plug.
A properly wired AC outlet.
REMEMBER: Experimentation and learning will reward you with a lifetime of rich synthesizer experiences.
42
43
44
45
45
46
48
49
51
52
53
56
58
58
59
1.
2.
3.
4.
5.
6.
1.
2.
3.
6

Moog Mother-32 Specifications

General

Type	Semi-modular analog synthesizer
Envelopes	ADSR envelope generator
Oscillator	1 x VCO with pulse and sawtooth waveforms
Filter	20Hz-20kHz Moog Ladder Filter with resonance
LFO	Low-frequency oscillator with triangle and square waveforms
Sequencer	32-step sequencer
Patch Points	32 x 3.5mm patch points
Power	12V DC power supply
MIDI	MIDI input