50
SETUP MODE (continued)
PARAMETER SELECTION 9-16
To access values 9-16, press (SHIFT)+Step buttons 1-8 (9-16). The value is indicated by red
Octave/Location LEDs. If a setting is on the same LED as the current page, the LED will ash
alternately between the yellow page color and the green or red setting color.
PROGRAMMING THE ASSIGNABLE OUTPUT
Select Page 1, and then press Step buttons 1-8 for Assignable output modes 1-8,
and (SHIFT)+Step buttons 1-8 for Assignable output modes 9-16.
ASSIGNABLE OUTPUT MODES
1: Accent (Default)
2: Sequencer Clock
3: Sequencer Clock / 2
4: Sequencer Clock / 4
5: Sequencer Step Ramp
6: Sequencer Step Saw
7: Sequencer Step Triangle
8: Sequencer Step Random
9: Sequencer Step 1 Trigger Output
10: MIDI Velocity
11: MIDI Channel Pressure
12: MIDI Pitch Bend
13: MIDI CC 1
14: MIDI CC 2
15: MIDI CC 4
16: MIDI CC 7
SETTING A MIDI CHANNEL
Select Page 2, and then press Step buttons 1-8 for MIDI Channels 1-8, and (SHIFT)+Step buttons 1-8
for MIDI Channels 9-16.
PROGRAMMING THE TEMPO INPUT
Select Page 3, and then press Step buttons 1-3 to select the desired Tempo input behavior.
1: CV INPUT MODE
2: SINGLE CLOCK ADVANCE MODE
3: DIN SYNC MODE
Select Values 9-16
+
To Next Page
Loading...
