EasyManuals Logo

Moog Matriarch Firmware Update

Moog Matriarch
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background image
CHANGES SINCE V1.1.0:
Synchronization and Timing Engine update - Analog Clock in/out and MIDI Clock all remain tightly in phase now,
eliminating the possibility of drift between these clocks which was present in earlier firmware.
New function when step recording: hold SHIFT + press the TIE button to duplicate the current step. This function
copies the note(s) from the current step to the next step and ties them together, advancing the sequence by one step
for each SHIFT + TIE press. This makes it easy to program longer notes and chords into your sequences.
New Global Parameter (5.1) “Arp/Seq CV Out Mirrors KB CV”: If ON, then the Arp/Seq CV OUT, GATE OUT, and
VEL OUT jacks on the front panel will output the same voltages as the rear-panel KB CV OUT, KB GATE OUT, and
KB VEL OUT jacks, whenever the Arp/Sequencer is not running.
New Behavior: HOLD button acts like a Sustain Pedal (KB Hold) when Arp/Seq is not running.
The default setting for CLOCK INPUT PPQN and CLOCK OUTPUT PPQN was changed from expecting/outputting a
clock every 8th note, to expecting/outputting a clock every 16th note (changed from 2 PPQN to 4 PPQN).
Arp/Sequencer Gate Length can be adjusted using MIDI CC 106. Value 64 = 50% gate length (default).
Matriarch no longer outputs unexpected streams of MIDI CC/NRPN data.
PPQN In/Out settings now match documentation in manual.
External Analog Clock overrides MIDI Sync.
Arp/Seq PLAY button does not output MIDI CC 73 (can still respond to it if necessary).
Improves compatibility with other Grandmother/Matriarchs.
Changed MIDI Clock Output default setting to “Off”.
Fix for stuck envelopes (was due to retriggering faster than a certain minimum, easy to do in multi-trig mode).
Can now edit global parameters via MIDI SysEx messages (documented below).
NEW GLOBAL PARAMETERS & FUNCTIONS:
4.8 MIDI OUT Filter - Panel Knobs (off, on)
4.9 MIDI OUT Filter - Pitch/Mod Wheels (off, on)
4.10 MIDI OUT Filter - Keys (off, on)
5.1 Arp/Seq CV OUT Mirrors KB CV
10.1 Reset Global Settings (function)
10.2 Show Firmware Version (function)
V1.2.0 RELEASE NOTES

Other manuals for Moog Matriarch

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moog Matriarch and is the answer not in the manual?

Moog Matriarch Specifications

General IconGeneral
Product typeAnalog synthesizer
Sound effectsDelay
Sound effects quantity1
Keyboard number of keys49
Maximum polyphony (notes)4
MIDI inYes
6.35 mm (1⁄4-inch) input3
6.35 mm (1⁄4-inch) output2
Input voltage240 V
DC input voltage12 V
Power source typeDC
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth361 mm
Width810 mm
Height139 mm
Weight13610 g

Related product manuals