Moog minimoog Voyager User Manual

9
Filter: A circuit that removes some frequencies and allows other frequencies to pass
through the circuit.
A filter has a cutoff frequency that determines the point at which frequencies begin
to be removed.
A lowpass filter is one in which frequencies above the cutoff frequency are removed
and all frequencies below the cutoff are passed through.
A highpass filter is one in which frequencies below the cutoff frequency are
removed and frequencies above the cutoff are passed through.
A bandpass filter has two cutoff frequencies that define a frequency band, outside
of which the frequencies are removed (figure 7).

Moog minimoog Voyager Specifications

General

Brand	Moog
Model	minimoog Voyager
Category	Synthesizer
Language	English