Moog Slim Phatty - Page 15

 Page16        

 SlimPhattyUser’sManualTheComponents        
 Page17

 SlimPhattyUser’sManualTheComponents
Envelope Generator Section Controls:
Attack:
When the ATTACK switch is selected, the analog edit control is used to adjust the Attack time of the corre-
sponding envelope from 1 msec to 10 seconds.
Decay:
When the DECAY switch is selected, the analog edit control is used to adjust the Decay time of the cor-
responding envelope from 1 msec to 10 seconds.
Sustain:
When the SUSTAIN switch is selected, the analog edit control is used to set the Sustain level of the corre-
sponding envelope.
Release:
When the RELEASE switch is selected, the analog edit control is used to adjust the Release time (the time
for the envelope to return to zero) from 1 msec to 10 seconds.
Additional Control:
The KB GATE jack on the side panel is a trigger input that accepts a footswitch (momentary, normally
closed like the Moog FS-1) or a gate signal. Pressing the footswitch or applying a gate signal (+5V) causes
both envelopes (Volume and Filter) to trigger.
PERFORMANCETIP:PluggingaFS1footswitchintotheKBGATEjackallowsyoutotrigger
orsustainanoteusingyourfootwithoutplayingthekeyboard–usefulifyouwanttofreeup
bothhandstomodifytwopanelfunctionsatonce.