Moog Slim Phatty - Advanced Preset Menus

 Page38        

 SlimPhattyUser’sManualTheUserInterface        
 Page39

 SlimPhattyUser’sManualTheUserInterface
POT MAP:
The Pot Mapping menu allows you to make arbitrary MIDI Continuous
Controller (CC) assignments to each of the four Analog Edit knobs
on the front panel (MOD, OSC, FILT, and EGR). Additionally, the four
knobs can be individually programmed to provide internal, external,
or combined MIDI control. Among its many possibilities, Pot Mapping
allows you to ‘reprogram’ the four panel knobs to control any of the
SP functions. For example, you could program Pot Mapping to give you
control of Filter Cutoff, Resonance, Overload and EG Amount, all at the
same time.
To set up Pot Mapping, press the CURSOR button and use the VALUE
knob to select the desired control knob (MOD, OSC, FILT, or EGR).
Press the CURSOR button again to move to the next field and select
the desired MIDI CC parameter.
NOTE:WhenPotMappingisenabledforagivenpanelsection,themappingassignmentoverrides
thenormalCCassignmentsinthatsection.Forexample,intheModulationsection,theLFORate
istransmittedasCC#03,andtheAmounttransmittedasCC#06.IfyousetupPotMappinginthe
ModulationsectiontosendMIDICC#21,theModulationknobwillexclusivelytransmitCC#21when
PotMappingisenabled,andnotCC#03or#06.WhenPotMappingisdisabled,theModulationknob
willreverttosendingthenormalMIDICC’s#03and#06.
The Keyboard Priority menu allows you to select the keyboard prior-
ity for individual presets. The default is GLOB (Global), which inherits
the global keyboard priority setting from the Master KEYBD PRIOR-
ITY menu, but this can be changed to low note, high note or last note
priority. To make a change, use the CURSOR to move to the priority
parameter field, then use the VALUE knob to select the desired value.
Values: GLOB, LOW, HIGH, LAST; the default value is GLOB
KEYBOARD PRIORITY (KB PRIOR):
The Tuning Scale menu allows you to select the tuning scale for indi-
vidual presets. The default is GL (Global), which inherits the global key-
board priority setting from the Master TUNING SCALE menu, but this
can be changed to any one of the 32 assigned tuning scales To make a
change, use the CURSOR to move to the priority parameter field, then
use the VALUE knob to select the desired value.
Values: GLOB, 0 - 31
TUNING SCALE