1715055 19 2017-08-30
press the fifth (last) display button on the unit when on the Home screen. The following
screen will appear:
This screen retrieves information from the PDM
regarding the amount of fluid in each ballast,
along with the position of the Port and
Starboard plates and the SmartPlate™.
Display key 1 turns On/Off the ZeroOff Cruise
System and activates the AutoWake system.
Display key 3 displays the Settings Menu.
Display key 5 displays the Map facility (when an
active Maps card is installed) or the Home
screen (when an active Maps card is NOT
installed).
To Next Page
Loading...