1715055 27 2017-08-30
Paddlewheel Offset and press Select. The arrow keys then become and + to adjust the
offset. Press the button below Done when finished.
Digital Gauges 1, 2 and 3:
These areas control the gauge presentation on the Main screen. Use the buttons below the
arrows to highlight the specific gauge to be altered and press Select. The arrow keys then
become and + to adjust the selection. Choose Water Temp, Water Depth, Battery Voltage,
Coolant Temp, Oil Pressure, SmartPlate™
Position, Engine Hours, Engine RPM or Fuel Level.
Press the button below Done when finished.
Vessel Settings
From the Menu pop-up, highlight Vessel Settings and
press the middle display key under Select.
To Next Page
Loading...