1715055 31 2017-08-30
Clear:
The AutoWake will use the inclinometer defaults for 0 degrees pitch and roll. This will usually
be off by a few degrees due to the mounting of the inclinometer. This returns the screen to
the AutoWake Settings page.
Confirm:
This changes the current values of the selection (pitch or roll) to be 0 degrees.
Close:
This closes the menu and returns the screen to the Home
page.
Map Settings (If Enabled)
Track Manager
Highlight the desired track and press the display key under
Select. The following Track Editor screen will appear:
To Next Page
Loading...
General