Moomba PV480 User Manual

1715055 30 2017-08-30
Roll Set Point:
This is the angle of roll that the boat is trying to achieve in the specified mode. Factory
default settings are colored gray. User-edited set points are colored orange. Use the arrow
keys to highlight this selection and press Select. Use the  and + keys to adjust, then press
Done.
Reset Set Points:
Selecting this will change the user set points (orange) to
match the default set points in the current mode.
Calibrate Inclinometer:
This selection will display the options to calibrate the pitch
and roll (separately) to 0°. Use the arrow keys to highlight
Calibrate Inclinometer and press Select. Then arrow to
Calibrate Pitch or Calibrate Roll and press Select. The
screen to the right will appear:
Cancel:
Cancels the calibration. AutoWake will continue to use the
previous calibration. This returns the screen to the
AutoWake Settings page.

Moomba PV480 Specifications

General

Brand	Moomba
Model	PV480
Category	Monitor
Language	English