1715055 29 2017-08-30
AutoWake Settings:
Use the arrow keys to highlight the area to edit and
press the display key under Toggle or Select.
Edit AutoWake Set Points:
Use the arrow keys to highlight this selection and
press the Toggle button to choose Surf Starboard,
Surf Port or Wake.
Pitch Set Point:
This is the angle of pitch that the boat is trying to
achieve in the specified mode. The factory default
settings are colored gray. The user-edited set
points are colored orange. Use the arrow keys to highlight this selection and press Select.
Use the and + keys to adjust, then press Done.
To Next Page
Loading...