380D Digital-to-Analog Converter
____________________________________________________________________________________
6
Unpacking
The Nēo 380D Digital-to-Analog Converter should be removed from its box with care.
The following accessories should be included inside the box with your Digital-to-Analog Converter:
9
AC power cable
9
‘CRM-2’ remote control with two ‘AA’ batteries
9
‘SimLink’ cable with 1/8” mini plug terminations on each end
9
Wi-Fi antenna for “MiND” Music Streamer equipped version of the MOON 380D
9
This owner’s manual
9
Warranty and product registration information (USA and Canada only)
Once the Nēo 380D is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest that
you keep all of the original packaging, storing it in a safe, dry place in case you’re required to transport this product. The
customized packaging is specially designed to protect the 380D from any potential damage during transit.
Please write the serial number of your new Nēo 380D in the space provided below for future reference.
Serial No.: ________________
For Nēo
380D’s equipped with the optional “MiND” Music Streamer, please visit our website
to download PDF versions of both the “MiND Setup Guide” and “MiND App User Guide”:
http://www.simaudio.com/MiND.htm
Installation & Placement
The Nēo 380D requires only minimal ventilation to maintain an optimum and consistent operating temperature. However,
you should avoid placing it near a heat source as this could compromise the Digital-to-Analog Converter’s performance and
reliability. As well, it should be placed on a solid level surface. The 380D uses toroidal transformers; even though they are
well shielded, you should not place the Digital-to-Analog Converter too close to source components sensitive to EMI, such as a
turntables.
In the event that your Nēo 380D is equipped with the “MiND” Music Streamer option and you intend to use its wireless
streaming feature (between your wireless router and your 380D), you must install the included Wi-Fi antenna on the back
panel by screwing it into the socket labelled “WIFI ANT”.
If you intend to use the Nēo 380D’s USB input connection with a Windows-based computer, you will need to
install our USB HD driver, which can be downloaded from our website:
http://www.simaudio.com/downloads.htm
Note: Apple-based computers don’t require this driver.
To Next Page
Loading...