Need help?Do you have a question about the moon 380D and is the answer not in the manual?
Covers numbered safety instructions from 1 to 15 for safe operation of the apparatus.
Details electrical warnings, shock hazards, and FCC compliance information for the device.
Advises on ventilation, heat sources, surface, and EMI sensitivity for proper installation.
Details the analog outputs, digital inputs (AES/EBU, S/PDIF, Toslink, USB), and monitor loop connections.
Power| digital power supply transformer | 25VA |
|---|---|
| analog power supply transformer | 10VA |
| digital power supply capacitance | 17, 600µF |
| analog power supply capacitance | 8, 800µF |
| power consumption at idle | 10 watts |
| AC power requirements | 120V / 60Hz or 240V / 50Hz |
Audio Performance| frequency response | 2Hz - 100kHz +0/-3dB |
|---|---|
| THD at 1kHz, 0dBFS (A-weighted) | < 0.001% |
| intermodulation distortion | < 0.001% |
| dynamic range | > 120dB |
| signal-to-noise ratio | > 120dB @ full output |
| slew rate | 50V/µs |
| channel separation | > 116dB |
| low level linearity | < ±0.25dB at -90dBFS |
| intrinsic jitter | 1 picosecond RMS |
Inputs and Outputs| analog outputs - balanced | 1 pair XLR – Fixed Level |
|---|---|
| optional analog outputs - balanced | 1 pair XLR – Variable Level |
| analog outputs - single ended | 1 pair RCA |
| optional analog outputs - single ended | 1 pair RCA – Variable Level |
| analog output impedance - XLR / RCA | 100Ω |
| max. analog output at 0dBFS - XLR / RCA | 2.0 Volts |
| bit-depth range / sampling frequency – all inputs | 16 to 24 bits / 44.1kHz to 192kHz |
| digital inputs | 2 x AES/EBU, 3 x S/PDIF, 2 x TosLink, 1 x USB |
| digital outputs | 1 x S/PDIF |
| digital monitor loop | S/PDIF - 1 input / 1 output |
Dimensions and Weight| dimensions (W x H x D) | 16.9 x 3.4 x 13.1 inches |
|---|---|
| shipping weight | 16 lbs / 7.5 Kgs |
To Next Page