MOON Equinox CD Player
Optional Remote Control Operation
The MOON Equinox CD Player uses the ‘FRM-2’ full function, all aluminum remote
control (figure 4). It operates on the Philips RC-5 communication protocol and is can
be used with other Simaudio MOON components.
The ‘FRM-2’ remote uses three AAA batteries (included). To install them, use the
supplied Allen key to remove the three screws located on the back plate; insert the
batteries in the correct direction and then screw the back plate back into place.
To operate the Equinox with this remote control, you must first press the button
labeled ‘CD’ on the top left corner.
The lower section of the ‘FRM-2’ has nine (9) buttons which operate the Equinox.
All of these functions are available on either the top panel or front panel of the CD
Player. Please refer to these aforementioned sections for a more detailed description
of each of these buttons:
X Play the compact disc loaded into the player
Skip to the previous track on the disc
Skip to the next track on the disc
Scan backwards through the current track of the disc
Pauses the player
Scan forward through the current track of the disc
2 Repeat the entire disc or the current track
Stop playing the current track
S Open/Close the CD drawer
Figure 4 FRM-2 Remote Control
____________________________________________________________________________________
Optional Remote Control Operation 12
To Next Page
Loading...
