Need help?Do you have a question about the moon i-7 and is the answer not in the manual?
Power| power supply transformers | 2 x 0.5kVA |
|---|---|
| power supply capacitance | 68, 800µF |
| output power @ 8Ω | 150 Watts per channel |
| output power @ 4Ω | 250 Watts per channel |
| maximum output voltage | 45 Volts |
| maximum current - peak | 40 amperes |
| maximum current - continuous | 20 amperes |
| power consumption @ idle | 50 Watts |
| AC power requirements | 120V / 60Hz or 240V / 50Hz |
Audio Specifications| input impedance | 23, 700Ω |
|---|---|
| input sensitivity | 490mV – 6.0V RMS |
| output impedance | 0.02Ω |
| damping factor | > 400 |
| gain | 37dB |
| signal-to-noise ratio (preamplifier / amplifier) | 114dB (20-20kHz) / 100dB @ full power |
| frequency response | 10Hz - 100kHz +0/-0.1dB |
| crosstalk @ 1kHz | -100dB |
| intermodulation distortion | Unmeasureable |
| THD (20Hz - 20kHz @ 1 watt) | < 0.015% |
| THD (20Hz - 20kHz @ 150 watts) | < 0.04% |
Weight and Dimensions| shipping weight | 58 lbs / 26 Kgs |
|---|---|
| dimensions (W x H x D) | 18.75 x 5.5 x 16.5 inches |
Lists essential safety guidelines for operating the amplifier.
Warns about the risks of electric shock and not opening the unit.
Explains warning symbols and CE compliance markings for user safety.
Welcomes the user, lists accessories, and guides initial inspection.
Outlines the advanced design features and technologies of the MOON i-7 amplifier.
Provides crucial advice on where and how to safely install the heavy amplifier.
Describes the function of each button and the display on the amplifier's front panel.
Details how to configure input labels, volume limits, offsets, and bypass modes.
Illustrates and describes all input and output connectors on the rear of the amplifier.
Explains the SimLink system for inter-component communication and control.
Guides users on the correct procedure for powering the amplifier and source components on and off.
Details how to use the included remote control for various amplifier functions.
Covers self-diagnostic shutdown messages like DC LEVEL and HIGHTEMP.
Explains the principles of balanced audio signals and their noise rejection benefits.
Lists comprehensive technical data including power, impedance, dimensions, and requirements.
To Next Page
