Need help?Do you have a question about the moon 250i and is the answer not in the manual?
Step-by-step guide for initial amplifier power-up and standby mode activation.
Correct order for powering amplifier and source components to prevent audible noise.
Power| power supply transformer | 320VA |
|---|---|
| power supply capacitance | 20, 000µF |
| output power at 8Ω | 50 Watts per channel |
| output power at 4Ω | 100 Watts per channel |
| maximum output voltage | 22 Volts |
| maximum current – peak | 15 amperes |
| maximum current – continuous | 9 amperes |
| ac power requirements | 120V / 60Hz or 240V / 50Hz |
Audio Specifications| input sensitivity | 370mV – 3.0V RMS |
|---|---|
| input impedance | 11, 000Ω |
| output impedance | 0.04Ω |
| damping factor | > 200 |
| gain | 37dB |
| dynamic headroom | 3dB |
| signal-to-noise ratio | 101dB @ full power |
| slew rate | 20V/µs |
| frequency response | 10Hz - 100kHz +0/-3dB |
| crosstalk at 1kHz | -78dB |
| intermodulation distortion | < 0.05% |
| thd (20hz - 20khz at 1 watt) | < 0.015% |
| thd (20hz - 20khz at 50 watts) | < 0.02% |
Weight and Dimensions| shipping weight | 22 lbs / 10 Kgs |
|---|---|
| dimensions | 16.9 x 3.5 x 14.4 inches |
To Next Page
