Need help?Do you have a question about the moon i-3 SE and is the answer not in the manual?
Power Supply| power supply transformer | 0.6kVA |
|---|---|
| power supply capacitance | 40, 000µF |
| maximum output voltage | 30 Volts |
Input and Output| input sensitivity | 400mV – 3.0V RMS |
|---|---|
| input impedance | 12, 000Ω |
| output power @ 8Ω | 100 Watts per channel |
Performance| signal-to-noise ratio | 100dB @ full power |
|---|---|
| frequency response | 10Hz - 80kHz +0/-3dB |
| dynamic headroom | 6dB |
Electrical| ac power requirements | 120V / 60Hz or 240V / 50Hz |
|---|---|
| maximum current – peak | 22 amperes |
| maximum current – continuous | 12 amperes |
Weight and Dimensions| shipping weight | 23 lbs / 10 Kgs |
|---|---|
| dimensions (W x H x D, inches) | 17 x 3 x 15.5 |
| output impedance | 0.04Ω |
Essential safety guidelines for operating the amplifier, covering handling, environment, and maintenance.
Critical warnings regarding electric shock risks, advising against exposure to water and opening the unit.
Interpretation of safety symbols on the amplifier and in the manual, indicating voltage hazards and servicing information.
Welcome message and introduction to the Simaudio MOON i-3 SE Integrated Amplifier's features and performance.
Instructions for carefully unpacking the amplifier and identifying included accessories and essential initial checks.
Overview of the integrated amplifier's key design features contributing to its high-end audio performance.
Recommendations for optimal installation, ventilation, and placement to ensure proper operation and longevity.
Detailed explanation of the front panel buttons, display, and their functions for controlling the amplifier.
Description of the rear panel inputs, outputs, power connector, and binding posts for system integration.
Guidance on connecting the power cable to the amplifier and a suitable AC outlet for optimal performance.
Step-by-step instructions for the first-time power-on sequence of the integrated amplifier.
Instructions for the correct sequence of powering the amplifier on and off to prevent audio disturbances.
Explanation of the full-function remote control, its buttons, and how to operate the amplifier remotely.
Comprehensive list of the amplifier's technical specifications, including power, dimensions, and frequency response.
Information on the correct fuse type and rating for replacement in the amplifier.
To Next Page
