Need help?Do you have a question about the moon 600i and is the answer not in the manual?
Power Supply| power supply transformers | 2 x 400VA |
|---|---|
| power supply capacitance | 80, 000µF |
| ac power requirements | 120V / 60Hz or 240V / 50Hz |
Audio Output| output power @ 8Ω | 125 Watts per channel |
|---|---|
| output power @ 4Ω | 250 Watts per channel |
| maximum output voltage | 35 Volts |
Physical Dimensions and Weight| shipping weight | 48 lbs / 21 Kgs |
|---|---|
| dimensions (w x h x d, inches) | 18.75 x 4.0 x 18.1 |
| output binding posts | Gold-plated WBT |
Performance| signal-to-noise ratio (preamplifier / amplifier) | 120dB (20-20kHz) / 105dB @ full power |
|---|---|
| frequency response | 10Hz - 100kHz +0/-0.1dB |
| slew rate | 35V/µs |
Electrical Characteristics| input impedance | 23, 700Ω |
|---|---|
| output impedance | 0.03Ω |
| damping factor | > 267 |
Covers user safety regarding water, heat, ventilation, power cords, and accessories.
Focuses on shock hazards, grounding, and prohibitions against opening or exposing to moisture.
Guidance on positioning the amplifier for proper heat dissipation and stability on a level surface.
Instructions for attaching the screw-on cones for stability and protecting surfaces.
Details on operating the Standby, Mute, and Display buttons for system control.
Explains how to adjust the left/right channel volume balance using the 'Bal' buttons.
Describes using input selection buttons and the rotary volume control for gain adjustment.
Overview of configurable features including input labels, volume limits, bypass, and trigger settings.
Details on customizing labels, max volume, offset, and bypass for individual inputs.
Step-by-step guide to setting custom labels, maximum volume, and offset for inputs.
Instructions for bypassing volume control and enabling or disabling inputs.
Guide to creating custom text labels for audio inputs using the front panel controls.
Instructions for setting the 'Line Out' to fixed or variable level for different applications.
Configuring the 12V trigger output for automatic component startup when switching inputs.
Disabling the front panel IR sensor and changing RC-5 codes for universal remote compatibility.
Procedure for resetting all software settings to their original factory configurations.
Overview of speaker binding posts and RCA/XLR inputs for connecting speakers and sources.
Details on RS-232, SimLink, IR input, 12V trigger, Line Out, AC input, and power switch.
Explains how SimLink enables communication for input switching, display synchronization, and standby control.
Step-by-step guide to turning on the integrated amplifier for the initial use.
Recommended order for powering the amplifier and source components to avoid noises.
Information on automatic shutdown due to DC detection or high temperature and how to diagnose.
Explains how balanced interconnects work to reject noise compared to unbalanced signals.
Details on using the aluminum remote control for power, input, volume, and balance adjustments.
To Next Page
