moon 600i - Specifications

MOON 600i Dual-Mono Integrated Amplifier
Specifications
Configuration ......................................................... Fully balanced, dual-mono
Power Supply Transformers ..................................... 2 x 400VA
Power Supply Capacitance ...................................... 80,000µF
Circuit Topology ...................................................... Open Loop
Balanced inputs (XLR) ........................................... 1 pair
Single-ended inputs (RCA) ..................................... 4 pairs
Input Impedance ................................................... 23,700Ω
Input Sensitivity ..................................................... 490mV – 6.0V RMS
Preamplifier line-level output (RCA) ......................... 1 pair @ 50Ω
Output Device Type - Amplifier ................................ Proprietary MOON BiPolars - 4 per channel
Output Binding Posts .............................................. Gold-plated WBT
Output Power @ 8Ω ................................................ 125 Watts per channel
Output Power @ 4Ω ................................................ 250 Watts per channel
Output Impedance .................................................. 0.03Ω
Damping Factor ...................................................... > 267
Volume Steps .......................................................... 0.5dB from 0-30 and 0.1dB from 30-80
Gain Control ........................................................... M-eVOL2
Gain ....................................................................... 37dB
Signal-to-noise Ratio (Preamplifier / Amplifier) ......... 120dB (20-20kHz) / 105dB @ full power
Maximum Output Voltage ........................................ 35 Volts
Slew Rate ............................................................... 35V/µs
Maximum Current - Peak / Continuous....................... 30 amperes / 18 amperes
Frequency Response .............................................. 10Hz - 100kHz +0/-0.1dB
Crosstalk @ 1kHz ................................................... -100dB
Intermodulation Distortion ...................................... Unmeasureable
THD (20Hz - 20kHz @ 1 watt) ................................ < 0.015%
THD (20Hz - 20kHz @ 175 watts) .......................... < 0.04%
Remote Control ...................................................... All Aluminum Full-Function (FRM-2)
Display Type............................................................ 8 character dot matrix LED
Power Consumption @ idle ..................................... 45 Watts
AC Power Requirements ......................................... 120V / 60Hz or 240V / 50Hz
Shipping Weight ..................................................... 48 lbs / 21 Kgs
Dimensions (W x H x D, inches) ............................... 18.75 x 4.0 x 18.1
Balanced Input Pin Assignment:
Pin 1................................ Ground
Pin 2................................ Positive
Pin 3 .............................. Negative
NOTE:
In the event that you require the RS-232 codes for your MOON 600i, please contact
Simaudio Ltd. directly by either email (service@simaudio.com) or by toll-free telephone
(877-980-2400).
Fuse Replacement: For the 120V version use a 5A fast blow (3AG size).
For the 230V version use a 3A fast blow (3AG size).
____________________________________________________________________________________
Specifications 16