Need help?Do you have a question about the moon 110LP and is the answer not in the manual?
Power| power consumption | 2 Watts |
|---|---|
| AC power requirements | 120V or 240V, 60Hz or 50Hz |
Audio Specifications| input impedance | 100 and 47kΩ |
|---|---|
| input capacitance | 0 and 100pF |
| gain | 40 and 60dB |
| input overload @ 40dB gain | 45mV RMS @ 1kHz |
| input overload @ 60dB gain | 4.5mV RMS @ 1kHz |
| signal-to-noise ratio @ 40dB gain | 104dBr |
| signal-to-noise ratio @ 60dB gain | 87dBr |
| maximum output | 3.0 Volts |
| frequency response | 20Hz - 20kHz (± 0.5dB) |
| crosstalk @ 1kHz | -97dB |
| intermodulation distortion | < 0.009% |
| THD (20Hz - 20kHz) | < 0.001% |
Weight and Dimensions| shipping weight | 2.5 lbs / 1.1 Kgs |
|---|---|
| dimensions | 5.0 x 2.9 x 6.5 inches |
Instructions for configuring capacitance, resistance, and gain for MM cartridges using internal jumpers.
Instructions for configuring capacitance, resistance, and gain for MC cartridges using internal jumpers.
Guidance on connecting the power supply for optimal sonic performance, avoiding extension cords.
Steps for connecting the AC power for the initial startup and what to expect.
Recommended procedure for powering the unit and connected components on and off to avoid audio artifacts.
To Next Page
