Owner’s Manual
5
Unpacking
The MOON 110LP should be removed from its box with care.
The following accessories should be included inside the box with your phono preamplifier:
9
External AC power supply
9
Quick Reference Guide
9
5/64” Allen key to remove the chassis cover and make internal adjustments
9
Product Registration Information (USA and Canada only)
As soon as the phono preamplifier is safely removed from its box and placed down, perform a thorough physical
inspection and report any physical damage to your dealer immediately. We suggest that you keep all of the
original packaging, storing it in a safe, dry place in the event that you’re required to transport this product. The
customized packaging is specially designed to protect the MOON 110LP Phono Preamplifier from potential
damage that may occur during transit.
Please write the serial number of your new MOON 110LP in the space provided below for future reference.
Serial Number
Installation
The MOON 110LP should be placed on a solid level
surface. You should avoid placing it near a heat source
or inside a closed cabinet that is not well ventilated as
this could compromise this component’s performance
and reliability. You should never place another
component directly on top of this phono preamplifier.
The 110LP is more sensitive than most other types of
audio components to EMI (electro-magnetic
interference) from power supplies and motors.
Consequently, it should be placed at a minimum
distance of 18 inches from power supplies, turntables,
tape decks, AC line filters, etc.
A turntable with a functional cartridge MUST be connected
to the MOON 110LP Phono Preamplifier prior to
connecting the AC power cord, otherwise you may
damage your amplifier and/or loudspeakers.
To Next Page
Loading...
