6
Seat post Mounting
• Choose the appropriate strap size to fit your seat post.
• Ensure the strap clicks securely into the hook.
• Hold the light unit against the seat post.
• Wrap the rubber strap around the seat post and stretch it over the hook to
secure it.
• Slide the light forward onto the bracket until it clicks into place.
• Press the release lever to remove the light when needed.
• When mounted on the handlebar or seat post, you can adjust the horizontal or
vertical beam angle. Loosen the screw knob and rotate the light left or right
or tilt it up or down to achieve the preferred angle. Tighten the screw knob to
secure the light in place.
To Next Page
Loading...
