Beam Angles
• 270° Total Angle – Provides wide illumination coverage.
• 60° Spot Angle – Focused beam for concentrated visibility.
Saddle Rail Mounting
Mounting Methods
Method 1
• Loosen the release screw and rotate clockwise to open the clamp.
• Secure the bracket onto the saddle rail.
• Attach the light unit onto the bracket until it clicks into place.
• Adjust the vertical beam angle for optimal illumination.
Method 2
• Adjust the clamp angle to fit the saddle rail.
• Secure the bracket onto the saddle rail by tightening the screw.
• Attach the light unit by sliding it into place.
• Adjust the vertical beam angle as needed.